| Name | Code | Inner diameter | Operating pressure | Connection type |
|---|---|---|---|---|
| T-branch (MхFхF) | IMZ-08.330.86 | 100mm | 1.6 MPa | 4″ API |
T-branch - part of a pipework with three connection ends; required to fasten branches inclined in relation to the main line. Way of branches connection - hammer unions of different types (MхMхF; MхFхF; MхMхM; FхFхF). | ||||
| Name | Code | Inner diameter | Operating pressure | Connection type |
|---|---|---|---|---|
| 90° branch (MхF) | IMZ-08.330.108 | 100mm | 1.6 MPa | 4″ API |
Branch - part of a pipework with two connection ends designed to change the pipework direction. Way of ends connection - hammer unions of different types (MхM; MxF; FхF). | ||||
| Name | Code | Inner diameter | Operating pressure | Connection type |
|---|---|---|---|---|
| Dead sampler | IMZ-08.330.109 | 100mm | 1.6 MPa | 4″ API |
Turning flange-mounted end sampler with one connection end for hammer unions of type M or F. Designed for taking samples in service pipeline. | ||||
| Name | Code | Inner diameter | Operating pressure | Connection type |
|---|---|---|---|---|
| T-branch sampler | IMZ-08.330.110 | 100mm | 1.6 MPa | 4″ API |
Turning flange-mounted side sampler with two connection ends for hammer unions of types ( MхF; FхF; MхM ). Designed for taking samples in service pipelines. | ||||
| Name | Code | Inner diameter | Operating pressure | Connection type |
|---|---|---|---|---|
| Crossover FхF | IMZ-08.330.07-01 | 100mm | 1.6 MPa | 4″ API |
Steel crossover - a part widely used in different pipelines and intended for connection of pipes with similar connection ends by hammer unions. | ||||